-
AGC-40
SKU: 653AGC40
Available by the cubic foot. ResinTech AGC-40 is a bituminous coal based, premium grade, granular activated carbon with a size range of 12 to 40 mesh. AGC-40 has large pores and high capacity for large organic molecules. AGC-40 is intended for all general purpose applications where high adsorption efficiency is desired.
AGC-40
$0.00 Add to cart -
AGC-40-CS
SKU: 653AGC40CS
ResinTech AGC-40-CS is a coconut shell based, premium grade, granular activated carbon with a size range of 12 to 40 mesh. The pore structure is carefully controlled to facilitate the adsorption of both high and low molecular weight organic molecules. ResinTech AGC-40-CS is intended for use in dechlorinating water and reducing organic impurities, as pretreatment for reverse osmosis and ion exchange systems.
AGC-40-CS
$0.00 Add to cart -
AGC-50 CS-SI
SKU: 653AGC50CSSI
ResinTech AGC-50 CS-SI (0.05) is a coconut shell based, premium grade, granular activated carbon with a size range of 20 to 50 mesh. AGC-50-CS-Si (0.05) has silver chemically plated onto the carbon surface. ResinTech AGC-50-CS-Si (0.05) has been designed and developed to inhibit the growth of bacteria.
AGC-50 CS-SI
$0.00 Add to cart -
AGC-MG
SKU: 653AGCMG
ResinTech AGC-MG is a bituminous coal based premium grade, granular activated carbon with a size range of 12 to 40 mesh, specially prepared for use in medical applications such as hemodialysis and for other applications that require batch certification and the cleanest possible preparation. ResinTech AGC-MG has extremely high surface area and a high degree of catalytic redox activity which enhances chloramine removal. ResinTech AGC-40-MG is acid washed and pH buffered.
AGC-MG
$0.00 Add to cart -
Anthracite
SKU: MTR-ANTHRACITE
- Higher service flows and longer filter runs than equivalent sand filters
- Close attention to gradation, hardness and purity assures consistent and reliable performance
- Unique density allows Clack Anthracite to be combined with other filtration media in multi-media filters
- Lower uniformity coefficient has less oversized and undersized particles resulting in a highly uniform bed
Anthracite
$0.00 Add to cart -
ASM-10-HP
SKU: ASM-10-HP
Special hydrated iron oxide infused hybrid strong base anion resin in the chloride form intended for arsenic removal from potable water. WQA Gold Seal certified to ANSI/NSF 61
ASM-10-HP
$0.00 Add to cart -
Calcite
SKU: MTR-CALCITE
- Naturally occurring material
- Low uniformity coefficient for maximum contact for controlled pH correction
- Slower reacting for controlled pH correction
- Inexpensive
Calcite
$0.00 Add to cart -
CG10
SKU: 653CG10
Premium grade strong acid cation resin intended for applications where superior physical and chemical durability are required.
CG10
$0.00 Add to cart -
CG10-BL
SKU: 653CG10BL
Dark colored premium grade strong acid cation resin intended for mixed beds where a clear color difference from the anion resin and near perfect separation is desired.
CG10-BL
$0.00 Add to cart -
CG10-H
SKU: 653CG10H
Premium grade strong acid cation resin in the hydrogen form intended for appplications that require higher resistance to oxidation and physical stresses.
CG10-H
$0.00 Add to cart -
CG8
SKU: 653CG8A
Industrial grade strong acid cation resin suitable for separate bed deionization, softening, and chemical processing. WQA Gold Seal certified to ANSI/NSF 61 when ordered as CG8-HP.
CG8
$0.00 Add to cart -
CG8-BL
SKU: 653CG8BL
Dark colored industrial grade strong acid cation resin suitable for separate bed deionization, softening, and chemical processing.WQA Gold Seal certified to ANSI/NSF 61 when ordered as CG8-BL-HP.
CG8-BL
$0.00 Add to cart -
CG8-C
SKU: 653CG8C
Coarse bead size strong acid cation resin intended for high flow rate applications where low pressure loss is important. WQA Gold Seal certified to ANSI/NSF 61 when ordered as CG8-C-HP.
CG8-C
$0.00 Add to cart -
CG8-F
SKU: 653CG8F
Reduced bead size strong acid cation resin intended for waters with high iron and applications where faster kinetics are required. WQA Gold Seal certified to ANSI/NSF 61 when ordered as CG8-F-HP.
CG8-F
$0.00 Add to cart -
CG8-F-BL
SKU: 653CG8FBL
ResinTech CG8-F is a sodium form 8% crosslinked gel strong acid cation resin. CG8-F is a fine mesh resin with high surface area and a short diffusion path from the surface to the center of the bead. ResinTech CG8-F is intended for use in applications such as iron removal where extra surface area and a short diffusion path are needed for improved kinetics and/or when operating in high TDS solutions. CG8-F is available in the sodium form. Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
CG8-F-BL
$0.00 Add to cart -
CG8-H-ID
SKU: 653CG8HID
ResinTech CG8-H-ID is a hydrogen form 8% crosslinked gel strong acid cation resin. CG8-H-ID is dyed with a permanent purple dye that changes from purple to yellow as the resin exhausts. ResinTech CG8-H-ID is intended for use anywhere that a visual indication of resin exhaustion is desired. CG8-H-ID is supplied in the hydrogen form. Samples are available in 16 ounce plastic jars.
 For larger quantities please email info@resintech.com
CG8-H-ID
$0.00 Add to cart -
CG8-UPS
SKU: 653CG8HUPS
Uniform particle size industrial grade strong acid cation resin intended for packed beds and other applications where low pressure loss is important. WQA Gold Seal certified to ANSI/NSF 61
CG8-UPS
$0.00 Add to cart -
CGS
SKU: 653CGS
Residential grade strong acid cation resin suitable for domestic softening, also useful in chemical processing. WQA Gold Seal certified to ANSI/NSF 44 and 61
CGS
$0.00 Add to cart -
CGS-BL
SKU: 653CGSBL
Dark colored residential grade strong acid cation resin suitable for domestic softening, also useful in chemical processing. WQA Gold Seal certified to ANSI/NSF 61
CGS-BL
$0.00 Add to cart -
Corosex
SKU: COROSEX
High degree of activity and speed of correction allowing high flow
- High capacity...less chemical usage
Corosex
$0.00 Add to cart -
Filter Sand and Gravel
SKU: MTR-FSANDGRAVEL
- Clack Filter Sand is graded specifically for water filtration plants
- Filter Sand can be used in municipal, industrial or residential applications
- The spherical shape of uncrushed gravel promotes good flow and even distribution
Filter Sand and Gravel
$0.00 Add to cart -
Filter-Ag
SKU: MTR-COROSEX
- There is less pressure loss through a bed of Filter-Ag® than through most other filter medias
- Light weight requires lower backwash rates than those required for other filter medias
- High service rates result in lower equipment costs and a savings in space
- High sediment reduction capacity results in longer filter runs, with a substantial savings in backwash water and time out of service
- Reduced shipping cost due to light weight/cu. ft.
- Replacement of sand with Filter-Ag in existing installations may increase filter capacity 100% or more. (Caution should be taken upon start-up that the lightweight Filter-Ag is not washed to drain)
Filter-Ag
$0.00 Add to cart -
Filter-Ag Plus
SKU: MTR-FILTERAGPLUS
- Deep bed filtration results in superior water quality and reduces the load on downstream equipment.
- High sediment removal capacity results in longer filter runs, with a substantial savings in backwash water and time out of service.
- High service flow rates result in lower equipment costs and a savings in space.
- Reduced shipping cost due to lighter weight/cu.ft.
- Replacement of multimedia with Filter-Ag Plus in existing installations may increase filter capacity.
- Filter-Ag Plus is an all-natural, environmentally safe product.
Filter-Ag Plus
$0.00 Add to cart -
Garnet
SKU: MTR-GARNET
- High specific gravity allows unique filter design
- In combination with other filter medias, higher flow rates, higher loading and better filtration can be achieved
- High hardness reduces attrition and provides for years of reliable service
- An excellent support bed for other high density medias
- Clack garnet meets AWWA B100-96 specifications.
Garnet
$0.00 Add to cart -
GreensandPlus
SKU: MTR-GREENSANDPLUS
The manganese dioxide coated surface of GreensandPlus™ promotes the oxidation reaction of iron, manganese, and hydrogen sulfide. The silica sand core of GreensandPlus allows it to withstand operating conditions in waters that are low in silica, TDS and hardness.
GreensandPlus
$0.00 Add to cart -
High Activated Carbon
SKU: MTR-HACARBONHAC
HAC is an outstanding material for applications requiring taste, odor and dissolved organic chemical removal from water with suspended matter present. This product can be used for filtering waters having a wide range of pH levels.
- Large surface area results in an exceptionally high capacity and efficiency.
- Balanced pore structure gives a more efficient adsorbtion range.
- HAC is very durable so losses due to attrition are kept to a minimum.
- HAC has a very high carbon-low ash content.
- Service rates of 5 gpm/sq. ft. are practical for ordinary taste, odor and chlorine loads.
- HAC will impart a high “polish” to the filtered water.
High Activated Carbon
$0.00 Add to cart -
IT-5
SKU: 653IT5
Specially sized inert granular media intended for use as a top layer in packed bed ion exchangers.
IT-5
$0.00 Add to cart -
MAG-MIX
SKU: 653MAGMIX
ResinTech MAG-MB is a one-to-one volume mixture of CG8-H (a hydrogen form strong acid cation resin) and SBG1P-OH (a hydroxide form type 1 strong base anion resin). MAG-MB utilizes amber colored cation and anion components such that the final mixture is amber or golden in color. ResinTech MAG-MB is intended for general purpose deionizing applications such as EDM operations or spot-free rinsing. MAG-MB is supplied ready to use with the cation component in the hydrogen form and the anion component in the hydroxide form. Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
MAG-MIX
$0.00 Add to cart -
MBD-10 LTOC
SKU: 653MBD10LTOC
ResinTech MBD-10 is a one-to-one equivalent mixture of CG8-H-BL (a hydrogen form strong acid cation resin) and SBG1-OH (a hydroxide form type 1 strong base anion resin). MBD-10 utilizes a dark colored cation resin and a light colored anion resin and is designed to produce very high water quality and to separate easily for regeneration. ResinTech MBD-10 is intended for use in all mixed bed deionization applications that require high resistivity and high capacity. MBD-10 is particularly well suited for portable exchange and other polishing applications. MBD-10 is supplied ready to use with the cation component in the hydrogen form and the anion component in the hydroxide form. Available in grades. Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
MBD-10 LTOC
$0.00 Add to cart -
MBD-10 NG
SKU: 653MBD10NG
ResinTech MBD-10 is a one-to-one equivalent mixture of CG8-H-BL (a hydrogen form strong acid cation resin) and SBG1-OH (a hydroxide form type 1 strong base anion resin). MBD-10 utilizes a dark colored cation resin and a light colored anion resin and is designed to produce very high water quality and to separate easily for regeneration. ResinTech MBD-10 is intended for use in all mixed bed deionization applications that require high resistivity and high capacity. MBD-10 is particularly well suited for portable exchange and other polishing applications. MBD-10 is supplied ready to use with the cation component in the hydrogen form and the anion component in the hydroxide form. Available in grades. Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
MBD-10 NG
$0.00 Add to cart -
MBD-10 SC
SKU: 653MBD10SC
ResinTech MBD-10 is a one-to-one equivalent mixture of CG8-H-BL (a hydrogen form strong acid cation resin) and SBG1-OH (a hydroxide form type 1 strong base anion resin). MBD-10 utilizes a dark colored cation resin and a light colored anion resin and is designed to produce very high water quality and to separate easily for regeneration. ResinTech MBD-10 is intended for use in all mixed bed deionization applications that require high resistivity and high capacity. MBD-10 is particularly well suited for portable exchange and other polishing applications. MBD-10 is supplied ready to use with the cation component in the hydrogen form and the anion component in the hydroxide form. Available in grades. Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
MBD-10 SC
$0.00 Add to cart -
MBD-16
SKU: 653MBD16
ResinTech MBD-16 is a one to one equivalent mixture of CG10-H-BL (a hydrogen form dark colored strong acid cation resin) and SBG1P-OH (a hydroxide form type 1 strong base anion resin). MBD-16 is made with a dark colored 10% crosslinked cation component designed to separate perfectly from the lighter anion component. ResinTech MBD-16 is intended for use in all mixed beds where the added density of a 10% crosslinked cation resin is desired to help improve separation. MBD-16 is supplied ready to use with the cation component in the hydrogen form and the anion component in the hydroxide form. Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
MBD-16
$0.00 Add to cart -
MBD-20
SKU: 653MBD20
Mixture of CG8-H-BL and SBG2-OH intended for all applications that require a mixed bed resin where fishy odors would be objectionable. This product has limited shelf life.
MBD-20
$0.00 Add to cart -
MBD-30
SKU: 653MBD30
Mixture of light hydrogen form cation and dyed hydroxide form anion that changes from blue to colorless as the resin exhausts. Intended for applications where a color change mixed bed is desired.
MBD-30
$0.00 Add to cart -
MTM
SKU: MTR-MTM
- Broad operating range for iron reduction
- Lower pressure loss through the bed with high flock holding capacity
- Effective hydrogen sulfide, iron and manganese reduction.
- Light weight requires lower backwash rates and reduces pumping requirements
- Chlorine can be beneficial in extending filter run times
- Low attrition loss for long bed life
- Lower shipping cost
MTM
$0.00 Add to cart -
Pyrolox
SKU: MTR-PYROLOX
- Effective reduction of iron, manganese and hydrogen sulfide
- Durable media with long service life
Pyrolox
$0.00 Add to cart -
SACMP
SKU: 653SACMP
Macroporous strong acid cation resin intended for applications requiring high resistance to oxidative, thermal, and osmotic stress. Gold Seal certified to ANSI/NSF 61 when ordered as SACMP-HP.
SACMP
$0.00 Add to cart -
SBACR-MP-HP
SKU: 653SBACRMPHP
ResinTech SBACR is a chloride form type 1 acrylic gel strong base anion resin. SBACR has an aliphatic chemical structure that is elastic and open allows organic ions to move in and out of the resin easily. ResinTech SBACR is intended for use in the chloride form as an organic trap and for use in the hydroxide form for demineralizers that have a high level of organics in the feedwater. SBACRis available in the chloride form or can be special ordered in the hydroxide form (when ordered as SBACR-OH). Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
SBACR-MP-HP
$0.00 Add to cart -
SBG1
SKU: 653SBG1
Premium grade type I strong base anion resin intended for separate bed deionization, softening, and chemical processing. WQA Gold Seal certified to ANSI/NSF 61 when ordered as SBG1-HP.
SBG1
$0.00 Add to cart -
SBG1P-OH
SKU: 653SBG1POH
Industrial grade type I porous strong base anion resin in the ready to use hydroxide form intended for all applications requiring a hydroxide form anion resin.
SBG1P-OH
$0.00 Add to cart -
SBG1P-OH-ID
SKU: 653SBG1POHID
ResinTech SBG1P-OH-ID is a dyed hydroxide form type 1 gel strong base anion resin. SBG1P-OH-ID is dyed with a permanent blue dye that changes from deep blue to amber as the resin exhausts. ResinTech SBG1P-OH-ID is intended for use anywhere that a visual indication of resin exhaustion is desired. SBG1P-OH-ID is supplied in the hydroxide form. Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
SBG1P-OH-ID
$0.00 Add to cart -
SBG2
SKU: 653SBG2
Industrial grade type II strong base anion resin intended for separate bed deionization, softening, and chemical processing. WQA Gold Seal certified to ANSI/NSF 61 when ordered as SBG2-HP.
SBG2
$0.00 Add to cart -
SBGIP-OH-UPS
SKU: 653SBG1POHUPS
ResinTech SBG1P-UPS is a narrowly graded chloride form type 1 porous gel strong base anion resin. SBG1P-UPS is a uniform particle size resin which results in increased void space and lower coefficient of drag than conventional gaussian distributed resins. ResinTech SBG1P-UPS is intended for use where resin uniformity is an important attribute to help reduce pressure loss or prevent strainer plugging. ResinTech SBG1P-UPS is supplied in the chloride form or can be special ordered in the hydroxide form (when ordered as SBG1P-OH-UPS). Samples are available in 16 ounce plastic jars. For larger quantities please email info@resintech.com
SBGIP-OH-UPS
$0.00 Add to cart -
SBMP1-OH
SKU: 653SBMP1OH
Type I macroporous strong base anion resin in the ready to use hydroxide form intended for regenerable and non-regenerable applications.
SBMP1-OH
$0.00 Add to cart -
SIR-300
SKU: 653SIR300
Special chelating weak acid cation in the sodium form intended for removal of various heavy metals from waste streams.
SIR-300
$0.00 Add to cart -
SIR-600
SKU: 653SIR600
Specially processed natural zeolite intended for removal of ammonia removal from potable water and removal of cesium from various radwastes.
SIR-600
$0.00 Add to cart -
WACG
SKU: 653WACG
Gel weak acid cation resin intended for dealkalization, deionization, and chemical processing where high chemical efficiency is required.
WACG
$0.00 Add to cart -
WBMP
SKU: 653WBMP
Industrial grade macroporous weak base anion resin intended for use in multiple bed demineralizers, resource recovery and waste treatment applications.
WBMP
$0.00 Add to cart